119:-

Alkyd Paint

Single component alkyd enamel paint, high gloss. For use above the waterline on steel, wood and fibreglass. For both outdoor and indoor environments. Recoatable after 48 hours at + 10 °C. Maximum time for recoating 6 days at + 10 °C and 3 days at + 20 °C. If the maximum time is exceeded, the surface exterior must be matte sanded before a new layer can be applied. Consumption: 11.5m2/litre. Contains 0.75 L.

Instructions for use Apply the paint with a brush, roller or pad. Stir well before use. The surface must be completely dry and clean. The outdoor temperature must not be lower than +5 degrees. Do not paint in bright sunlight, on hot surfaces or in humid conditions. Ensure the area is well-ventilated. Apply 2-3 layers of paint. The amount of thinner required depends on the temperature, ventilation and surface. Use thinner produced for single component alkyd enamel. The brushes should be cleaned with thinner/white spirits.
  • ALKYL ENAMEL RED 0,75L

    ALKYL ENAMEL RED 0,75L

    Art. 30-523
    Red
    119:-
    158,67 / L
  • ALKYL ENAMEL GRAY 0,75L

    ALKYL ENAMEL GRAY 0,75L

    Art. 30-522
    Grey
    119:-
    158,67 / L
  • ALKYL ENAMEL BLUE 0,75L

    ALKYL ENAMEL BLUE 0,75L

    Art. 30-524
    Blue
    119:-
    158,67 / L
  • ALKYD ENAMEL BLACK 0,75L

    ALKYD ENAMEL BLACK 0,75L

    Art. 30-525
    Black
    119:-
    158,67 / L
  • ALKYL ENAMEL OFF-WHITE 0,75L

    ALKYL ENAMEL OFF-WHITE 0,75L

    Art. 30-521
    Off-white
    119:-
    158,67 / L