From
8990

Anchor Resin

Strong chemical fastener with many areas of use. High load capacity. For affixing threaded bars, rebars and similar in concrete and cracked concrete, for upright installation, small edge distances, secondary reinforcement, etc. Fast curing. ETAG 001-05 Option 1 & 7.
  • Strong and secure fastening. Tolerates high tensile and shear loads.
  • Fast curing
  • High chemical resistance: suitable for use in corrosive and/or moist environments.
  • Approved for use in both cracked and non-cracked concrete in accordance with ETAG 001-05 Option 1 and 7
  • Approved for post-installed rebar connections in accordance with EOTA TR023.
  • Can be used for small edge distances and narrow spacing between the anchoring points.
  • Upright installation: suitable for upright installation e.g. in roofs.
  • Styrene-free product. Virtually odourless.
  • Can be used underwater e.g. in damp or water-filled holes.
  • Cartridge with 1 mixer tube. Can be applied with puttygun.
  • Reuse opened cartridges by replacing the mixingnozzle.
Areas of use
  • Strong and secure fastening of threadedbars, rebars, and similar in concrete.
  • Installation of balconies, railings, gates, brackets, antennas, handrails, etc.
Approvals
ETAG 001-05 Option 7 non-cracked concrete with threaded bars and steel reinforcements TR029.
ETAG 001-05 Option 1 for cracked concrete with threaded bars.
EOTA TR023 for post-installed rebar connections.
  • INJECTION MORTAR 165 ML

    INJECTION MORTAR 165 ML

    Art. 20-5323
    165 ml
    8990
    544,85 / L
  • INJECTION MORTAR 300 ML

    INJECTION MORTAR 300 ML

    Art. 20-5324
    300 ml
    139:-
    463,33 / L
  • INJECTION MORTAR WINTER 300 ML

    INJECTION MORTAR WINTER 300 ML

    Art. 20-5325
    189:-
    630:- / L

Accessories

  • PIPE FOR INJECTION MORTAR 10-P

    PIPE FOR INJECTION MORTAR 10-P

    Art. 20-5326
    3990