Use non-woven adhesive and regular wallpapering tools. In wetrooms, wetroom adhesive should be used.
The wall, or other substrate, should be dry and clean. If the substrate is excessively porous it should be primed before mounting. Test on a small area to get an appreciation of the substrate's condition.
The side that is to lie against the wall surface is rolled up on the inside of the roll. Apply adhesive to the wall and then apply the lengths edge-to-edge. You can choose whether to cut the lengths before or after applying them to the wall. Do not use too much adhesive - the smallest possible amount yields the best results. Always follow the adhesive manufacturer's instructions. When the weave has dried fully, approx 24 h at 20 °C, it can be painted or wallpapered over.