9990
99,90 / L

Teak oil

Art.. 36-3661
Area of application:
Dehydrating alkyd wood oil for treating previously oiled or untreated outdoor furniture, etc. in teak.

Special properties:
The oil is clear, dehydrating and with a low viscosity. Hardwoods are most often very fatty. The outer wood turns grey quickly. The oil provides a good protection against moisture as it penetrates and fills the wood pores to achieve a water-repellent oil surface. One single treatment often gives a fresh surface. The oil contains waxes and is consequently dirt repellent

Instructions for use:
The surface must be firm, dry and well-cleaned, steel-brushed and/or sanded. Loose, porous and disintegrating wood must be removed. Apply with a brush or rag. Be especially careful with the end sections. The oil is applied until the substrate finishes absorbing it. After a few minutes any excess oil is wiped off with a rag or sponge. The treatment is repeated until a fresh, shiny surface is achieved. Stir well before and during use.

Technical data:
*Binding agent: Alkyd oils *Gloss: Depending on surface *Density: approx. 0.87 g/cm³ *Dry matter content: 32 volume % *Colour: Clear *Material consumption: 4-10 m²/l *Viscosity: 30-40 sec, 3 mm beaker *Fire Class: 3 *Storage/transport: 2 years in unopened package. *Painting conditions: Above +4 °C, not too warm *Dilution/cleaning: White spirit/Aliphatic spirit *Drying time: approx. 1 day, depending on temperature and air humidity *Contents: 1 l
Warning
Harmful to aquatic life with long lasting effects. May cause an allergic skin reaction.
Show safety phrases
Dispose of contents/container to hazardous or special waste collection point. If skin irritation or rash occurs: Get medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. Avoid breathing vapours/spray. Keep out of reach of children. If medical advice is needed, have product container or label at hand.