119:-
23,80 / KG

ROT

Art. 36-8344
Easily-worked mortar that hardens and cures quickly. For repairing and filling solid substrate indoors and outdoors, for example, broken stone step edges, pillars, etc. Can be applied vertically or horizontally. Also suitable for floor levelling with a run-off towards a floor drain. Can be laid in layers from 1 mm to 25 mm. Highly absorbent substrate must be primed with Primer C, 5 kg.

Application thickness: 1 to 25 mm. Dries and cures quickly.
Consumption: 1.6 kg/m2 for each mm of thickness.
Shelf Life: 12 months from the date of manufacture, when stored in a dry place.
Instructions:
The substrate must be clean, fully dry, solid and free from cracks and rising damp. Absorbent, porous substrates with powder-fine surfaces must first be treated with Primer C. Measure up the correct amount of water (1-1.2 l to one 5 kg packet) in Biltema's graduated bucket, 86-1022. Pour the measured water into a clean vessel. Thereafter add the contents of the packet whilst mixing, until a homogeneous and lump-free mass has formed. Allow it to rest for 5 minutes, then mix it again. Apply the product with a metal trowel. The mortar must be used within 60 minutes. In order to achieve a smoother surface a lightly moistened grouting board can be used, as soon as the mortar has stiffened sufficiently. Drying time approx 3 hours at +23 °C. If tiles are to be laid on top of the mortar, this can be done after about 4-6 hours. Carpet or hard flooring can be laid after 24 hours.
PRODUCT FOR PROFESSIONAL USE - IF IN DOUBT, READ THE TECHNICAL INSTRUCTION OR ASK A PRODUCT EXPERT BEFORE STARTING TO USE IT.