Work Gloves 649
Technical data*Material, glove Polyester*Material, coating Latex*Material, elastic Polyester CE-mark This product is CE-marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.
This product has been constructed and manufactured in accordance with the following standards.*EN 4202003+A12009 – General requirements for protective gloves.*EN 3882003 – Gloves for protection against mechanical hazards.A more detailed description of the gloves' performance level is shown below.
EN 3882003 – Gloves for protection against mechanical hazards.
This glove conforms to EN 388, with a performance level according to the table.
|Tested property |Level, gloves| Max. level| |Abrasion resistance a)| 2| 4| |Cut resistance b)| 2| 5| |Tear resistance c)| 4| 4| |Puncture resistance d)| 3| 4| |Protection level| 1|2| 3|4| 5||Abrasion resistance a)| 100| 500| 2000| 8000| -||Cut resistance b)| 1,2| 2,5| 5,0| 10,0| 20,0||Tear resistance c)| 10| 25| 50| 75| -||Puncture resistance d)| 20| 60| 100| 150| -|
a) Number of rotations in sanding machine.
b) Resistance to rotating blades (index).
c) Test example torn in opposite direction (Newton).
d) Pressure applied to test example with sharp awl (Newton).
The gloves protect against physical and mechanical stress. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with applicable standards. The gloves must not*Come into contact with fire.*Be used when there is a risk of entanglement in moving machinery. Store at normal temperatures and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded.