Work Gloves mechanics 774
- Material, back: Spandex *Material, palm: Synthetic material
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.
This product has been constructed and manufactured in accordance with the following standards: *EN 420:2003+A1:2009 – General requirements for protective gloves. *EN 388:2003 – Gloves for protection against mechanical hazards. *The product complies with the restriction rules in Annex XVII of the European REACH regulations.A more detailed description of the gloves' performance level is shown below.
- EN 388:2003 – Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.
|=Tested property |=Level, glove |=Max. level |Abrasion resistance |2 |4 |Cut resistance |1 |5 |Tear resistance c) |2 |4 |Puncture resistance |1 |4|Cut resistance in compliance with EN ISO13997d) |X |FX indicates that the test method is not suitable for the glove's design or material.|=Protection level |=1 |=2 |=3 |=4 |=5|Abrasion resistance a) |100 |500 |2000 |8000 |-|Cut resistance b) |1.2 |2.5 |5.0 |10.0 |20.0|Tear resistance c) |10 |25 |50 |75 |-|Puncture resistance d) |20 |60 |100 |150 |-a) Number of revolutions in sanding machine.
b) Resistance to rotating cutting bldes (index).
c) Test sample cut in opposing direction (Newton).
d) Sharp bradawl pressed against the test sample (Newton).
The glove protects against physical and mechanical influence. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with applicable standards. The gloves must not *Come into contact with fire. *Be used when there is a risk of entanglement in moving machinery parts. Be stored at normal temperatures and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded.