Leather Winter Work Gloves 368
*Material, back: Spandex *Material, inner hand: Pigskin *Material, lining: 3M Thinsulate® C40 *Material, elastic: PolyesterCE marking:
This product is CE marked in accordance with the Personal Protective Equipment Directive, 89/2016/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.
Certifications: This product has been constructed and manufactured in accordance with the following standards: *EN 420:2003+A1:2009 – General requirements for protective gloves. *EN 388:2016 – Gloves for protection against mechanical hazards. *EN 511:2006 – Gloves for protection against cold temperatures. *The product complies with the restriction rules in Annex XVII of the European REACH regulations.A more detailed description of the gloves' performance level is shown below.
EN 388:2016– Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.
|=Tested property |=Level, glove |=Max. level |Abrasion resistance a) |2 |4 |Cut resistance b) |1 |5 |Tear resistance c) |1 |4 |Puncture resistance d) |1 |4|Cut resistance in compliance with EN ISO13997 e) |X |FX indicates that the test method is not suitable for the glove's design or material.
|Protection level||1||2||3||4||5 |Abrasion resistance a) |100 |500 |2000 |8000 |- |Cut resistance b) |1.2 |2.5 |5.0 |10.0 |20.0 |Tear resistance c) |10 |25 |50 |75 |- |Puncture resistance d) |20 |60 |100 |150 |-|
b) Resistance to rotating cutting blades (index).
c) Test sample that can be torn in opposite direction (Newton).
d) Sharp bradawl is pressed against the test sample (Newton).
EN 511:2006 – Gloves for protection against Cold conditions.
These gloves conform to the requirements for contact cold in accordance with EN 511:2006, with a performance level according to the table (X= property not tested).
|=Tested property |=Level, glove |=Max. level|Convection cooling |X |4 |Contact cooling |1 |4 |Water penetration |X |1
|Protection level||0||1||2||3||4 |Convection cooling(I) |I ≤ 0.10 |0.10 ≤ I |0.15 ≤ I |0.22 ≤ I |0.30 ≤ I |Contact cooling (R) |R ≤ 0.025| 0.025 ≤ R| 0.050 ≤ R |0.100 ≤ R |0.150 ≤ R |Water penetration |Penetration |No penetration | ||
Safety information: The gloves protect against physical and mechanical stress, and against cold temperatures. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must not::
- Come into contact with fire. *Be used when there is a risk of entanglement in moving machinery.