Chalkboard/blackboard paint
Our chalkboard paint is a water-based, matte paint that you can easily paint on walls, cabinets, or door to create your own blackboard. It’s ideal for a child’s room to promote creativity, or perhaps in the hall to write down the family’s activities and schedules?
Chalkboard paint can be applied to felt, wallpaper, untreated wood, previously painted wood, and plasterboard.
Once the paint has dried, it can be written on with chalk and is easily cleaned with water.
Tile paint
Redo your bathroom or kitchen with our tile paint. Thanks to its good flow, the tile paint is easy to apply. It has a high degree of coverage, and the end result is a smooth and neat finish without brush streaks.
In addition, the painted surface becomes very durable and wear resistant.
Countertop oil
Do you have a wooden countertop in the kitchen that is starting to look a little worn?
Treat the countertop with our countertop oil and enjoy the feel of a brand-new kitchen.
Chinese wood oil
Our countertop oil is a Chinese wood oil that penetrates deep into the wood and effectively protects the surface against moisture, wear, drying out, and cracking. You can apply the wood oil to both new and previous oil-impregnated wood surfaces indoors.
How to apply countertop oil
- Clean and sand the surface with sandpaper.
- Apply the wood oil with a brush, sponge, or rag until the surface is completely saturated.
- Wait a few minutes, then wipe off the excess oil with a towel or cloth.
- Allow the oil to dry for at least 24 hours, then apply a new coat of oil if necessary.
Varnish
With our synthetic varnish, you protect woodwork and wooden floors against wear and a fantastically deep lustre. The varnish is the last coat of your acrylic or oil painting, and produces an amazing finish.
You can also apply the varnish to concrete and linoleum to give them a neat finish.
How to paint with varnish
- Make sure that the surfaces are clean and dust-free.
- Stir the paint thoroughly before application.
- Apply the varnish with a suitable brush. You need to apply 2-3 coats on wooden surfaces that have not previously been varnished. On surfaces that have previously been treated with varnish, one coat is enough.
Frequently asked questions about special paint
How should I paint tiles?
Start by cleaning and wiping the tiles. If there are cracks or holes in the tiles, these need to be filled first. When the tiles are completely dry, you can start applying the tile paint with a brush or roller.
Can I use countertop oil in a bathroom?
Yes. Our countertop oil can be used in damp areas such as bathrooms or kitchens.
What is the difference between lacquer and varnish?
The big difference between lacquer and varnish is that varnish is a colourless, while the lacquer paint usually contains colour pigments.
