Work Gloves 647
Technical data*Material, glove: Polyester*Material, coating: Latex*Material, elastic: PolyesterCE-marking
This product is CE-marked in compliance with the PPE Directive, (EU) 2016/425. It conforms to the directive's requirements for safety, comfort and efficacy.
This product is designed and manufactured in accordance with the following standards.*EN 420:2003+A1:2009 – General requirements for protective gloves.*EN 388:2016– Gloves for protection against mechanical risks.A more detailed description of the performance levels for the glove is shown below.
EN 388:2016 – Gloves for protection against mechanical hazards.
This glove meets the requirements of EN 388, with the performance level according to the table.
|Tested Property |Level, glove| Max. level| |Abrasion resistance a)| 2| 4|
|Cutting resistance b)||1||5|
|Tear resistance c)||4||4|
|Puncture resistance d)||3||4||Cutting resistance in accordance with EN ISO13997 d)||X||F|| |
X indicates that the test method is not suitable for the glove's design or material.
|Protection level||1||2||3||4||5||Abrasion resistance a)||100||500||2000||8000||-||Cutting resistance b)||1,2||2,5||5,0||10,0||20,0||Tear resistance c)||10||25||50||75||-||Puncture resistance d)||20||60||100||150||-|
a) Number of revolutions in sanding machine.
b) Resistance to rotating cutting blades (index).
c) Test sample torn in opposing directions (Newton).
d) Sharp bradawl pressed against the test sample (Newton).
The glove protects against physical and mechanical stress. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must not:*Come into contact with fire.*Be used when there is a risk of entanglement in moving machinery parts.Be stored at a normal temperature and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded.